Cybersecurity for smart water monitoring devices
Smart water sensors produce your Legionella compliance evidence and sit on your network. How UK facilities teams keep that data secure and trustworthy.
All articles
480 articles. Filter by topic or search the full site.
24 articles on this page · 480 total
Collaborating with public health authorities on Legionella
When UKHSA or environmental health links a Legionella case to your building, the call goes well only if your records are already in order. How to be ready.
Scientific analysis of a Legionella outbreak
How a Legionella outbreak gets traced to its source by matching patient and water samples, and the records that decide if your building is cleared or blamed.
Case study: a Legionella compliance prosecution in the UK
A composite UK case showing how a Legionella prosecution turns on your records, not the bacteria, and the evidence that protects a duty holder.
Legionella risk scoring: how to rate and rank risks
Score Legionella risk so the ranking reflects real exposure, not a borrowed matrix, then turn the numbers into a defensible order of remedial work.
Energy savings vs Legionella risk: finding the balance
Some energy savings strengthen Legionella control; others quietly remove it. A UK guide to which hot and cold water cuts are safe, and the conditions for each.
Proactive vs reactive Legionella monitoring strategies
Reactive checks feel cheaper until the evidence lands too late. Compare proactive and reactive Legionella monitoring by risk, evidence quality and effort.
Backup strategies for digital Legionella records
If your Legionella logbook vanished tomorrow, could you prove control? A UK backup checklist covering exports, retention, vendor lock-in and restore tests.
Green buildings and water-saving systems: balancing Legionella risk
Low-flow taps, greywater and renewable hot water cut bills but can raise Legionella risk. How UK building teams keep water savings and safety together.
Industry standards: how LCA membership helps avoid failures
How to use the standards behind LCA registration to spot where your Legionella control is drifting before a positive sample or an HSE inspector finds it first.
Upgrading your programme: when to adopt new technology
A four-question test for UK duty holders weighing remote monitoring, sensors and digital logbooks: when new Legionella tech earns its place, and when to wait.
Anticipating regulatory changes: staying ahead of the curve
How UK water safety leaders spot Legionella guidance changes early and build a control scheme that absorbs an ACoP or HSG274 update without a costly rebuild.
Advances in Legionella research and studies
When a new Legionella study lands, how do you tell what changes your controls from what is just lab progress? A practical filter for duty holders.
Legionella and building regulations: design-stage considerations
Design-stage choices decide how safe and cheap a water system is to run. See the drawing-board forks that create dead legs, stagnation and warm cold water.
Managing Legionella risk across multiple sites
Managing Legionella across a property portfolio? Learn to spot where control drifts, tell a local fault from a system one, and fix the right thing first.
UK water temperature guidance for Legionella control
The UK hot and cold water temperatures that control Legionella, and why passing readings can still hide a system quietly losing its grip.
Continuous water quality monitoring systems
Continuous monitoring catches temperature drift faster than monthly checks, but it verifies control, it can't replace it. Judge it by alarms and coverage.
Managing records across multiple sites
Keep Legionella records across a property portfolio consistent and ready to produce a complete trail for whichever single site an inspector picks.
Scaling up: Legionella in large vs small buildings
Legionella risk doesn't scale with floor area. See how control duties land differently in large and small buildings, and where each one actually fails.
Lockdown lessons: water stagnation during COVID-19
When lockdown emptied UK buildings, the water sat still. Here's how to plan for dormancy and make reopening the safe moment, not the dangerous one.
Sensor calibration and maintenance: ensuring accuracy
A drifting Legionella temperature sensor can hide a failing outlet behind a green dashboard. How to catch silent drift and keep readings you can trust.
Future-proof design: plumbing designs that minimise Legionella
Cut Legionella risk at the drawing board: design out dead legs, right-size storage and run the design checks that matter before the drawings are signed off.
Legionella genetics: strains, sequence typing and source tracking
How sequence typing links a Legionnaires' case to a building, why most cases are never typed, and what that means for a UK duty holder's sampling decisions.
Reporting Legionnaires disease: RIDDOR, public health and incident escalation
When a Legionnaires' case is linked to your building: the three reporting channels, when a RIDDOR report is actually yours, and the first moves to make.
No articles match those filters.
Cite this page
"All articles - page 8." Legionella.io. https://legionella.io/articles/page/8/
Free to reuse under CC BY 4.0: quote, adapt or republish with attribution and a link back to the original.
Was this page useful?